After using the high-flow water filter element for a period of time, it needs to be replaced and cleaned in order to work better and make it effective. So, when replacing the high-flow water filter element, what needs to be paid special attention to?

The high-flow water filter element is a pressure-type filter device with high filtration efficiency, long life and easy cleaning. However, in order to ensure its good performance in use, some points need to be paid attention to during the replacement and cleaning process.

When performing replacement work, it is forbidden to open the cover when there is pressure in the large-flow water filter device, otherwise the residual liquid may be sprayed out, causing certain economic losses and even injury to the staff.

When replacing, you should hold the handle of the upper cover with one hand, and the other end of the cover with the other hand, align it with the filter mouth and slowly lower it, so that it is naturally flat on the sealing ring and the filter bag ring mouth, and evenly press the upper end of the filter bag. The bolts are tightened and fixed.

Check the pressure gauge to make sure the internal pressure is 0, and ensure that the high-flow water filter element is closed tightly. At this time, the filter is separated from the pipeline system, open the emptying valve, and open the cover after the residual liquid in it is drained.

Of course, after installation, the high-flow water filter element should be cleaned and maintained regularly according to the usage conditions to prolong the service life of the equipment.